7 Steps to Maintain a Pool in Florida

Share This Post

Taking care of your pool can be an expensive and time-consuming task. It requires constant maintenance, and sometimes it seems like every time you turn around there’s another leak or something else wrong with your pool. So, taking proper care of your pool can save you a lot of money in the long run. Here are some tips on how to maintain a pool and keep it safe, clean, clear, and enjoyable.

Check and maintain water level

In Florida, the temperature of your pool may change daily. The water level should be checked daily to ensure its safety and to avoid unnecessary equipment damage. It is also important to keep an eye on how much water is in the pool so that you don’t run out during peak summer months when it may take more time for rainwater to replenish levels. If you are concerned about running out of water during this time, we recommend that you purchase a rain gauge or use one from your local hardware store and attach it to your pool pump.

If there are any leaks in your system, they should be repaired immediately before they can cause further damage or even become dangerous. Make sure all components are properly maintained by cleaning filters regularly and checking for loose screws/bolts whenever necessary!

Test and balance the water

Test your water regularly:

Test the pH levels of your pool regularly, as they’re affected by temperature and other factors. The pH should be between 7.2 and 7.6, if you notice that your pH level is high or low, you can use a pH adjustment product to neutralize it.
If there are any issues with the chlorine levels in your pool, do a free chlorine test to see how much is left in the water, then add more if necessary. It should be between 1 ppm (parts per million) and 3 ppm.
Check that you have enough bromine in addition to chlorine by testing bromine levels at least twice per week—the ideal range is between 2–4 ppm (parts per million).
Alkalinity keeps pH stable over time and helps prevent scale build-up on surfaces. It should be between 80–120 parts per million (ppm).

Finally, and most importantly test again after adding chemicals.

Having a water flow

The first thing you should do is check the pump. If it’s not working, you need to fix it right away. Make sure that there aren’t any leaks in your pipes or filter. The last thing you want is for water to be leaking out of the pool and heading into your yard, where it could cause problems with the grass or even kill some plants if they don’t have enough time to adjust to their new environment!

You also want to make sure that your pool has a return jet so that all of the water from splashing around doesn’t just drain back down into the bottom of your pool!

Run the filter long enough to clean the water

Run the filter long enough to clean the water. If you have a filter and it’s not running, clean it first. If you don’t have a filter, get one!

Remember, filters need to be cleaned every 1-2 months and replaced every 3-4 years.

If your pool is running and has been for some time but there’s still algae in it, run your pump and filter for 24 hours straight (or longer if needed).

Clean the pool

To clean your pool, you’ll want to use a pool vacuum with a deck brush attachment.

You can also use a leaf rake and net to clean the steps and deck of large debris.

If the water is clear, then it’s probably safe to say that you don’t need to run your filter 24/7—just make sure you aren’t letting it go too long without cleaning out any accumulated debris first (this will keep it from becoming clogged).

Winterize your pool for the season

Once you’ve closed the pool, it’s time to winterize it. This involves draining the water out of the pool and cleaning it so that when spring arrives, you can quickly open your pool for use again.

It’s important to winterize your pool because if left unfrozen and uncovered for long periods, pools may experience damage from freezing water or improper maintenance.

If you have a saltwater pool, you’ll need to drain the water first before beginning winterization. This will prevent your equipment from getting damaged by freezing saltwater.

If you have a chlorine generator, leave half of the water in your pool so that it can continue working.

Use shock treatment only as needed

Shock treatment is a chemical used to clean water. It should only be used when needed and not in winter. However, this may be one of the most important tips on how to maintain a pool since it kills bacteria and destroys other contaminants that may affect your health.

7 Steps - How To Maintain A Pool

Check and maintain water level
Test and balance the water
Having a water flow
Run the filter long enough to clean the water
Clean the pool
Winterize your pool for the season
Use shock treatment only as needed

Conclusion

How to maintain a pool? You’ll need to take care of your pool during the summer, but you don’t want to spend all your time on it. Pay attention to what needs doing and do it quickly so you can get back to relaxing in the sunshine!

Expertly Managing Your Most Valuable Assets in Florida

Tell us how we can be of help and we will get back to you as soon as possible. You can always reach out to us at +1 305 896 2126 or email us at [email protected]